head light lamp switch automatic car headlamp light sensor auto switch for Jeep Wrangler JL

Description

The automatic headlamps are activated through a photoelectric sensor which is embedded into the instrument panel. The sensor is located at the base of the windshield under the defogger grill. The sensitivity of the sensor is either set by the auto manufacturer or the driver. The sensor is activated by the lighting conditions at dawn or dusk. The lights may switch off up to five minutes after the engine has been turned off. The driver has the ability to bypass the functions of the automatic headlamps by operating the light switch or some other device in the car. If the driver inadvertently leaves the lights on, a reminder chime will ring so the driver can turn them off.

About installation

1.Installation manual:
• We have a detailed installation manual,which will be sent to you with the goods.
2.The vehicle configuration function (sales code) is activated.
• If you have wi-TECH1.0 vehiclediagnostic tool, we can remotely connect to your PC through ToDesk program for activation.
• If you have a third-party programming tool, you can also activate this function by yourself, such as Tazer, etc.
• If you need to buy wi-TECH diagnostic tool, please click "Buy wi-TECH"
PS: you need to consult the customer service for confirmation whether this product supports your vehicle or not,before placing an order

head light lamp switch automatic car headlamp light sensor auto switch for Jeep Wrangler JL Images